CC3000 Breakout Board and Teensy 3.0

For other supported Arduino products from Adafruit: Shields, accessories, etc.

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
jimmayhugh
 
Posts: 58
Joined: Thu May 17, 2012 8:33 pm

CC3000 Breakout Board and Teensy 3.0

Post by jimmayhugh »

The CC3000 library on Adafruit's github site would not compile when the Teensy 3.0 board was the target. I posted this problem over at the http://forum.pjrc.com/threads/23954-WiF ... #post34918 Teensy site, and Paul updated the library to work with the Teensy 3.0. The updated library is here: https://github.com/PaulStoffregen/Adafr ... 00_Library.

Since Adafruit carries both devices, I thought it might be of some interest. I personally will be using it on my TeensyPi project http://www.teensypi.com.

User avatar
jimmayhugh
 
Posts: 58
Joined: Thu May 17, 2012 8:33 pm

Re: CC3000 Breakout Board and Teensy 3.0

Post by jimmayhugh »

Whoops, guess I should have put this in the "Breakout Boards" sub-forum.

Admins, please move this...

Locked
Please be positive and constructive with your questions and comments.

Return to “Other Arduino products from Adafruit”