Wav Sheild and Amplifier
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adamr1
- Posts: 120
- Joined: Sun Jun 02, 2013 8:24 am
Wav Sheild and Amplifier
I am working on a project that includes a wave shield. I have never used one of the amplifiers (3.7W or 2.8W Class D Audio Amplifier) but in this case I am looking for a louder output than just the wave shield can provide. Since the output from the wave shield is mono, if I used the 3.7W or 2.8W Class D Audio Amplifier, would I take the speaker output from the shield and wire both to the R and L inputs on the amplifier? Thanks for the info.
- adafruit_support_bill
- Posts: 88154
- Joined: Sat Feb 07, 2009 10:11 am
Re: Wav Sheild and Amplifier
Yes. You can wire the speaker outputs directly to the R & L inputs of these amps.
- adamr1
- Posts: 120
- Joined: Sun Jun 02, 2013 8:24 am
Re: Wav Sheild and Amplifier
thank you again!
Please be positive and constructive with your questions and comments.