Boarduino Pinout

For other supported Arduino products from Adafruit: Shields, accessories, etc.

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
quade
 
Posts: 61
Joined: Sat Dec 14, 2013 5:03 pm

Boarduino Pinout

Post by quade »

I'm looking at the DC Boarduino schematic and the board itself and see several places where it indicates +5V.

Are all of these from the on-board 5V regulator drawing power from the 2.1mm DC jack?

I have a green light from the power supply, but I don't seem to be outputting 5V from any of the pins indicated. I've tried powering from both the 2.1mm DC and an FTDI Friend.

User avatar
quade
 
Posts: 61
Joined: Sat Dec 14, 2013 5:03 pm

Re: Boarduino Pinout

Post by quade »

Oh, one more thing. I've been able to upload the "blink" sketch, so I'm fairly certain power in general is okay.

User avatar
adafruit_support_mike
 
Posts: 67454
Joined: Thu Feb 11, 2010 2:51 pm

Re: Boarduino Pinout

Post by adafruit_support_mike »

The source of the +5v rail is shown in the "Power Supply" box in this version of the schematic: http://learn.adafruit.com/system/assets ... inosch.png

The basic idea is that you select either the regulator or the USB 5v rail as the power source, but you only want one at a time. All other pins and traces labeled "+5v" tie back to the center pin in the header where you select the power source.

User avatar
quade
 
Posts: 61
Joined: Sat Dec 14, 2013 5:03 pm

Re: Boarduino Pinout

Post by quade »

Awesome. Got it figured out now. Thanks.

Locked
Please be positive and constructive with your questions and comments.

Return to “Other Arduino products from Adafruit”