Hello,
For my project I want to order a 2 BMP180 barometric sensor, but the size of the sensor isn't specified on the site. It need to fit through a 20mm hole, is that possible?
Best regards,
Bram
BMP180 size
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
-
- Posts: 306
- Joined: Wed Jun 12, 2013 5:01 pm
Re: BMP180 size
There should be a link to the BMP180 data sheet on the product page.
Or google the part number to find the data sheet.
The data sheet should have the full specs of that part including dimensions.
Or google the part number to find the data sheet.
The data sheet should have the full specs of that part including dimensions.
-
- Posts: 4
- Joined: Tue Feb 25, 2014 9:31 am
Re: BMP180 size
There is a data sheet but that is only for the Bosch sensor not for the adafruit sensor (board). So that is still unknown
- jcgoodman
- Posts: 107
- Joined: Thu Jan 23, 2014 6:03 pm
Re: BMP180 size
I just measured mine, it's 19mm x 18mm.
-
- Posts: 306
- Joined: Wed Jun 12, 2013 5:01 pm
Re: BMP180 size
Oh, you want the size of the break out board not just the sensor!
Please be positive and constructive with your questions and comments.