Adafruit Data Logging Shield Not Talking to me

For other supported Arduino products from Adafruit: Shields, accessories, etc.

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
loonhaunt
 
Posts: 81
Joined: Sat Nov 16, 2013 1:40 am

Adafruit Data Logging Shield Not Talking to me

Post by loonhaunt »

I am using an Adafruit Data Logging Shield with an Uno R3
I am getting initialization failure when I run the CardInfo sketch. I have changed the pin assignment from 4 to 10 in the code. I have also tried an ethernet shield using the same code with appropriate pin assignment and the sketch works fine. What other trouble shooting can I do to see if I hosed my shield by putting on the stacker headers? (This is my suspicion) I have another Adafruit DS shield in service and it works fine. I really like the onboard RTC which I also need for this project.

Dave

User avatar
adafruit_support_bill
 
Posts: 88093
Joined: Sat Feb 07, 2009 10:11 am

Re: Adafruit Data Logging Shield Not Talking to me

Post by adafruit_support_bill »

Post some nice clear photos of the soldering on your headers and we'll see if we can spot any problems.

Locked
Please be positive and constructive with your questions and comments.

Return to “Other Arduino products from Adafruit”