VS1053 Codec + MicroSD Breakout PRODUCT ID: 1381
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- branhamr
- Posts: 20
- Joined: Tue Jan 07, 2014 5:48 pm
VS1053 Codec + MicroSD Breakout PRODUCT ID: 1381
You list the length and width of the breakout board, but no thickness. I'm working on a VERY size-sensitive project. I assume that the SD holder is the thickest part, but would like to know the actual size please.
- adafruit_support_rick
- Posts: 35092
- Joined: Tue Mar 15, 2011 11:42 am
Re: VS1053 Codec + MicroSD Breakout PRODUCT ID: 1381
The thickest part is the caps on the opposite end from the SD slot.
At the SD slot, the overall thickness is 3.5mm. At the caps, it's 7.5mm
At the SD slot, the overall thickness is 3.5mm. At the caps, it's 7.5mm
- branhamr
- Posts: 20
- Joined: Tue Jan 07, 2014 5:48 pm
Re: VS1053 Codec + MicroSD Breakout PRODUCT ID: 1381
Thank you, Sir.
Please be positive and constructive with your questions and comments.