Is there a schematic available for the PN532 Arduino Shield? The link on the page pulls up the schematic for the breakout board. I am specifically interested in finding out if the Shield can be used with 3.3V devices or will it only work with 5V ones.
Thanks
PN532 Shield Schematic
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_bill
- Posts: 88093
- Joined: Sat Feb 07, 2009 10:11 am
Re: PN532 Shield Schematic
It is here in github: https://github.com/adafruit/Adafruit-PN ... NFC-Shield
Please be positive and constructive with your questions and comments.