Hi guys,
i've downloaded the eagle files of the MicroSD breakout board, but there is a problem. The schematic seems fine, but the board totally doesn't. Everything on the board seems to be wired correctly, but the 3v and the gnd pins are not wired to anything. Am i missing something? Is the board 3 layers or more? I have Eagle 6.5.0 light. Thanks!
MicroSD brekout board eagle
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_rick
- Posts: 35092
- Joined: Tue Mar 15, 2011 11:42 am
Re: MicroSD brekout board eagle
Good eye! Looks like a snafu with the layout file. I'll flag the engineers.
- adafruit2
- Posts: 22148
- Joined: Fri Mar 11, 2005 7:36 pm
Re: MicroSD brekout board eagle
There's nothing wrong with the files :) we have a power and ground plane, its the entirety of the top and bottom, check out eagle tutorials to learn about polygon pours, thx!
-
- Posts: 14
- Joined: Mon Jul 08, 2013 1:01 pm
Re: MicroSD brekout board eagle
Oh right! I forgot the polygon! Thank you so much guys!
Please be positive and constructive with your questions and comments.