Just got my kit, love it. Its awesome.
I am having a slight problem though. When I put the batteries in the green LED stays on. When I hit the switch, the LED turns off for the duration that the button is held, but as soon as I let go, it returns to a steady green. The IR LED's are working, tv's turn off and on and its wonderful. This green LED though is confusing me.
Also, it gets hot, quick too. Within a minute I almost dropped it while trying to take the batteries out.
Any help would be awesome!
LED Stays on?
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
-
- Posts: 12151
- Joined: Thu Apr 06, 2006 4:21 pm
Re: LED Stays on?
you should post a photo of the kit top and bottom
-
- Posts: 7
- Joined: Wed Jul 15, 2009 1:37 am
Re: LED Stays on?
My bad, bad soldering, all fixed. Thanks anyways!
- brenryan
- Posts: 9
- Joined: Thu Jan 17, 2013 4:32 am
Re: LED Stays on?
Hi spazenport,
I was wondering if you could elaborate on exactly which connections you found to be faulty.
I am experiencing the same issue, however I am not using the board supplied. I used stripboard and a project box to make a mega array described in this thread.
http://forums.adafruit.com/viewtopic.php?f=23&t=37715
I am using a 9v battery to power an array of 20 IR LED's with a 5v voltage devider from same to power the circuit.
Works fine, all IR LED's light up and the green LED blinks whilst running through the codes, then it remains on.
If you could let me know which traces/components you checked and soldered, that would be great. Because I've checked everything and it all looks ok.
Thanks for reading...
I was wondering if you could elaborate on exactly which connections you found to be faulty.
I am experiencing the same issue, however I am not using the board supplied. I used stripboard and a project box to make a mega array described in this thread.
http://forums.adafruit.com/viewtopic.php?f=23&t=37715
I am using a 9v battery to power an array of 20 IR LED's with a 5v voltage devider from same to power the circuit.
Works fine, all IR LED's light up and the green LED blinks whilst running through the codes, then it remains on.
If you could let me know which traces/components you checked and soldered, that would be great. Because I've checked everything and it all looks ok.
Thanks for reading...
Please be positive and constructive with your questions and comments.