TVBG euro compilation

Get help and show off your TV-B-Gone kit!

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
bzorg
 
Posts: 6
Joined: Fri Jun 29, 2012 6:13 pm

TVBG euro compilation

Post by bzorg »

Hello,
I have bought a tvbg and everything is going well (have some fun in the supermarket)
so I have make a only led kit from the diagram on a breadboard (v1.2) and it works , testing 5 different kind of LED
that shut the tv, and I am wondering if there's something to change to the makefile, to have only the euro codes
in the .hex file ?

#CFLAGS += -std=c89
#CFLAGS += -std=gnu89
#CFLAGS += -std=c99
CFLAGS += -std=gnu99

ifdef EU_CODE
CFLAGS += -DEU_CODES


Or are all the codes are in the .hex file (us + euro) ?

Thank you for the great job you've done and the fun you give !

adafruit
 
Posts: 12151
Joined: Thu Apr 06, 2006 4:21 pm

Re: TVBG euro compilation

Post by adafruit »

the tvbgone kit can be put into EURO mode bu simply soldering in a 10K resistor - no need to write or compile! :)

bzorg
 
Posts: 6
Joined: Fri Jun 29, 2012 6:13 pm

Re: TVBG euro compilation

Post by bzorg »

Yes this is was I have done with the adafruit kit, so where is the resistor on the electronic scheme or where should I put it on my bredboard ?

adafruit
 
Posts: 12151
Joined: Thu Apr 06, 2006 4:21 pm

Re: TVBG euro compilation

Post by adafruit »

Hi, we can't really offer step-by-step assistance for DIY versions of our kits since it depends on too many variables - check the product website ALL information is there!

bzorg
 
Posts: 6
Joined: Fri Jun 29, 2012 6:13 pm

Re: TVBG euro compilation

Post by bzorg »

I got it , actually , it was simple

Locked
Please be positive and constructive with your questions and comments.

Return to “TV-B-Gone Kit”