How To Add Codes To Tv-B-Gone

[Mastermime]

Hi,

I found some codes that I would like to add to the current codes on the Tv-B-Gone.

The top code in the link is what I would like to add. I downloaded the firmware, but where would I add it in the main C file
http://www.remotecentral.com/cgi-bin/co ... touchdisc/

[adafruit_support_bill]

Those codes are expressed as hex values with no timing information. The TVBGone is encoded as a series of on-times and off-times. To convert your codes, you would need to know the time-base used and the way the command bytes are coinverted to pulses. Or you could just sample them from the remote. http://learn.adafruit.com/ir-sensor/ir-remote-signals