Hi,
I found some codes that I would like to add to the current codes on the Tv-B-Gone.
The top code in the link is what I would like to add. I downloaded the firmware, but where would I add it in the main C file
http://www.remotecentral.com/cgi-bin/co ... touchdisc/
How To Add Codes To Tv-B-Gone
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_bill
- Posts: 88088
- Joined: Sat Feb 07, 2009 10:11 am
Re: How To Add Codes To Tv-B-Gone
Those codes are expressed as hex values with no timing information. The TVBGone is encoded as a series of on-times and off-times. To convert your codes, you would need to know the time-base used and the way the command bytes are coinverted to pulses. Or you could just sample them from the remote. http://learn.adafruit.com/ir-sensor/ir-remote-signals
Please be positive and constructive with your questions and comments.