TV B Gone not making it by first test

Get help and show off your TV-B-Gone kit!

Moderators: adafruit_support_bill, adafruit

TV B Gone not making it by first test

Postby mgalimbe » Wed Mar 13, 2013 1:53 pm

hello,

I've gone as far as inserting the microprocessor and testing by inserting 2aa batteries and checking that the green led light flashes, well it doesn't... chip is in right (socket was soldered in place using the outline on the board)triangle is on the side with the indentation on the socket, led was soldered with longer pin in the + terminal and i know the batteries are good.
I also pushed the button just in case i had an older version.

any ideas on whats going on. all my solders look good....

Mike
mgalimbe
 
Posts: 6
Joined: Wed Mar 13, 2013 1:48 pm

Re: TV B Gone not making it by first test

Postby adafruit_support_bill » Wed Mar 13, 2013 3:51 pm

If you post photos, front & back we'll check over your build.
User avatar
adafruit_support_bill
 
Posts: 15898
Joined: Sat Feb 07, 2009 9:11 am

Re: TV B Gone not making it by first test

Postby mgalimbe » Wed Mar 13, 2013 6:11 pm

I'm not able to post images from my computer to this forum....
mgalimbe
 
Posts: 6
Joined: Wed Mar 13, 2013 1:48 pm


Re: TV B Gone not making it by first test

Postby mgalimbe » Thu Mar 14, 2013 4:19 am

ok attachments below
Thank you
Attachments
DSC00009.jpg
bottom view tv b gone
DSC00009.jpg (220.55 KiB) Viewed 401 times
DSC00007.jpg
Top View TV B Gone
DSC00007.jpg (225.43 KiB) Viewed 401 times
mgalimbe
 
Posts: 6
Joined: Wed Mar 13, 2013 1:48 pm

Re: TV B Gone not making it by first test

Postby adafruit_support_bill » Thu Mar 14, 2013 6:00 am

It could be the lighting, but the solder joints on the chip socket look a bit "frosty" like a cold joint. Re-touch those with a hot iron so they are smooth and shiny. If it still doesn't work, contact support@adafruit.com with a link to this thread and ask for a replacement TV-B-Gone processor.
User avatar
adafruit_support_bill
 
Posts: 15898
Joined: Sat Feb 07, 2009 9:11 am

Re: TV B Gone not making it by first test

Postby mgalimbe » Wed Mar 27, 2013 4:27 pm

hello,

just updating this post per the request of support. I was shipped a new chip and installed it but it still wont work. I'm wondering if it may be the board.
mgalimbe
 
Posts: 6
Joined: Wed Mar 13, 2013 1:48 pm


Re: TV B Gone not making it by first test

Postby mgalimbe » Thu Mar 28, 2013 6:28 am

I will. I'm at work for the next 48 hours so ill send it to you Saturday. Thank you for your help. Mike
mgalimbe
 
Posts: 6
Joined: Wed Mar 13, 2013 1:48 pm


Return to TV-B-Gone Kit

Who is online

Users browsing this forum: No registered users and 1 guest

Stuff to buy from the Adafruit store and links to product documentation!


New Products [105]

Raspberry Pi[80]
 
FLORA[23]
 
Bunnie Studios[9]
 
FPGA[1]
 
mbed[11]
Arduino[60]
 
NETduino[14]
 
BeagleBone[24]
 
Android[6]
 
XBee[10]
More Dev Boards[30]


 
BoArduino[8]
 
SpokePOV[4]
 
TV-B-Gone[4]
 
MiniPOV[3]
 
SIM reader[3]
 
Microtouch[5]
 
Clocks & Watches[18]
 
Drawdio[4]
 
Brain Machine[1]
 
Game of Life[2]
 
MintyBoost[2]
More DIY Kits[16]


 
MaKey MaKey[3]
 
Tweet-a-Watt[5]
 
Young Engineers[33]
 
Discover Electronics[2]
 
Snap Circuits[4]
 
littleBits[3]
 
Project packs[8]


 
Breakout Boards[33]
LCDs & Displays[48]
Components & Parts[69]
Batteries & Power[49]
EL Wire/Tape/Panel[52]
LEDs[108]
 
Wireless[14]
Cables[60]
 
Lasers[6]
Sensors/Parts[145]
 
Enclosures/Cases[11]
 
Solar[11]
 
RFID / NFC[13]
Prototyping[69]
 
iDevices[13]
Tools[71]
 
Wearables[39]
 
CNC[37]
 
Robotics[29]
 
3D printing[1]
 
Materials[24]


 
Stickers[41]
 
Skill badges[55]
 
Books[25]
 
Circuit Playground[7]
 
Gift Certificates[4]