Hi everyone, this is my first post here,
I was looking at the work made by other contributors last week and it inspired me to get a Kit and try it myself.
I would like to share my case that I completed for the TV B Gone.
the LEDs conveniently lay where the sd card slot was and the on/off switch is the same size as the Tripod slot, the indicator light is used by the 'working' green LED The Shutter button activates the TV B Gone..
The Screen, Lens and the flash were glued back in, the 2xAAA battery chamber is now used by the TVBG.
As the case would not fold nicely over to close I cut a slit for the on off switch, this then gave me the idea to cut a long slot across for the LEDs, as the unit automatically starts the first cycle on switching on, the shutter only re-starts, you can operate TVBG without removing the camera from it's case.
I cut the PCB so I could retain the battery and the shutter switch, but allow me room to include the TVBG.
Here is the Wiring, I bent the green LED flat so it would shine through the flash ready lens in the front of the camera, I tacked the wires from the tac-switch the the shutter button.
I have posted these pictures from post image as the originals from myblog are too bog for here, but please feel free to visit and view them.
TV B Gone Vs Digital Camera
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_bill
- Posts: 88093
- Joined: Sat Feb 07, 2009 10:11 am
Re: TV B Gone Vs Digital Camera
Nicely done! Thanks for posting
-
- Posts: 2
- Joined: Sun Jan 12, 2014 4:42 am
Re: TV B Gone Vs Digital Camera
No problem, like most of the best projects we do, we did not know we were going to do them at all!adafruit_support_bill wrote:Nicely done! Thanks for posting
I saw the posts here last week and by saturday I was soldering my kit up.
Thanks for blogging it too, very chuffed with that
Please be positive and constructive with your questions and comments.