I have a TVBGone-kit 1.1. I have a USBTinyISP.
How do I upgrade my chip to the EU codes?
I have got the 1.1 hex-file from here
http://BANNED.net/projects/tvbgone/tvbgone_1.1.zip
The German posts says something about resistors?
Isn't it just to use do this:
avrdude -c usbtiny -p t85 -U flash:w:tvbgone_EU_1.1.hex
BEFORE soldering the four resistors (R1 R2 R3 R4)?
European FAQ
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
-
- Posts: 168
- Joined: Wed Jan 16, 2008 5:41 pm
Re: European FAQ
I believe that is correct and yes you must do it before soldering the resistors r1 to r4.Salvatore wrote:avrdude -c usbtiny -p t85 -U flash:w:tvbgone_EU_1.1.hex
BEFORE soldering the four resistors (R1 R2 R3 R4)?
check this thread third post down for more command lines.
- salvatore
- Posts: 6
- Joined: Sat Feb 09, 2008 7:07 am
Re: European FAQ
What thread third post?jasonx wrote:I believe that is correct and yes you must do it before soldering the resistors r1 to r4.Salvatore wrote:avrdude -c usbtiny -p t85 -U flash:w:tvbgone_EU_1.1.hex
BEFORE soldering the four resistors (R1 R2 R3 R4)?
check this thread third post down for more command lines.
-
- Posts: 168
- Joined: Wed Jan 16, 2008 5:41 pm
Sorry this one http://www.ladyada.net/forums/viewtopic ... highlight=
I was in a hurry at lunch
I was in a hurry at lunch
Please be positive and constructive with your questions and comments.