mass producing flashed ATTINY85's

For Adafruit customers who seek help with microcontrollers

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
cag
 
Posts: 21
Joined: Mon Jun 18, 2012 10:34 pm

mass producing flashed ATTINY85's

Post by cag »

I've got a design that I need to replicate in large-ish batches. Currently I have to flash all the tiny's before mounting them in my PCB. How does one go about getting a bunch of them flashed in bulk? Is there a service that does that?

My choices now, as I move to SMD - are to build programming ports into the PCB, or make some sort of jig to bulk flash a bunch at once prior to mounting (I'm doing that currently with through-hole). Figure there's got to be a better way.

THANKS!
Andy

adafruit
 
Posts: 12151
Joined: Thu Apr 06, 2006 4:21 pm

Re: mass producing flashed ATTINY85's

Post by adafruit »

we suggest having the ISP header broken out so after its soldered you can flash the chip using a USBTiny or similar - pogo pins work great for this!

User avatar
westfw
 
Posts: 2008
Joined: Fri Apr 27, 2007 1:01 pm

Re: mass producing flashed ATTINY85's

Post by westfw »

http://www.digikey.com/product-detail/e ... ND/2238295
This part can be programmed by Digi-Key; for details please contact our custom department at 1-800-344-4539 x5725 or [email protected]

Locked
Please be positive and constructive with your questions and comments.

Return to “Microcontrollers”