I've got a design that I need to replicate in large-ish batches. Currently I have to flash all the tiny's before mounting them in my PCB. How does one go about getting a bunch of them flashed in bulk? Is there a service that does that?
My choices now, as I move to SMD - are to build programming ports into the PCB, or make some sort of jig to bulk flash a bunch at once prior to mounting (I'm doing that currently with through-hole). Figure there's got to be a better way.
THANKS!
Andy
mass producing flashed ATTINY85's
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
-
- Posts: 12151
- Joined: Thu Apr 06, 2006 4:21 pm
Re: mass producing flashed ATTINY85's
we suggest having the ISP header broken out so after its soldered you can flash the chip using a USBTiny or similar - pogo pins work great for this!
- westfw
- Posts: 2010
- Joined: Fri Apr 27, 2007 1:01 pm
Re: mass producing flashed ATTINY85's
http://www.digikey.com/product-detail/e ... ND/2238295
This part can be programmed by Digi-Key; for details please contact our custom department at 1-800-344-4539 x5725 or [email protected]
Please be positive and constructive with your questions and comments.