Resistive Touch Screen to USB Mouse Controller - AR1100
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- spartan_h45
- Posts: 2
- Joined: Fri Jan 10, 2014 8:35 pm
Resistive Touch Screen to USB Mouse Controller - AR1100
When I first plugged in my AR1100 it acted just as it was supposed to, and showed up as a mouse. The moment I plugged in my touchscreen to calibrate it, it began registering several hundred mouse clicks opening multiple applications simultaneously on my computer. Is there something that i need to do prior to calibrating my touchscreen that I may have overlooked? Is this a common problem, or is it possible that I may have a defective board?
- adafruit_support_rick
- Posts: 35092
- Joined: Tue Mar 15, 2011 11:42 am
Re: Resistive Touch Screen to USB Mouse Controller - AR1100
Make sure that the touchscreen FPC is firmly seated in the connector. Also, plug in the touch screen before powering the AR1100. See if any of that helps.
- spartan_h45
- Posts: 2
- Joined: Fri Jan 10, 2014 8:35 pm
Re: Resistive Touch Screen to USB Mouse Controller - AR1100
It seems to not be making a difference.I also tried using a different touchscreen controller thinking that maybe the screen overlay itself was damaged, but it works with the other controller.
- adafruit_support_rick
- Posts: 35092
- Joined: Tue Mar 15, 2011 11:42 am
Re: Resistive Touch Screen to USB Mouse Controller - AR1100
OK - that was my next question. But the touch screen is working, so let's replace the AR1100. Please email [email protected] with a link to this thread for a replacement
Please be positive and constructive with your questions and comments.