Hi all,
Can someone recommend me a good small I2C LCD for Teensy 3.0?
Thanks!
I2C LCD for Teensy 3.0
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_mike
- Posts: 67485
- Joined: Thu Feb 11, 2010 2:51 pm
Re: I2C LCD for Teensy 3.0
It depends on what you mean by 'small', but I'm pretty sure the Nokia 5110 display works with the Teensy 3.0 using our library: http://www.adafruit.com/products/338
-
- Posts: 6
- Joined: Mon Oct 14, 2013 12:09 pm
Re: I2C LCD for Teensy 3.0
I was looking more in the lines of these:
http://www.adafruit.com/products/772
or
http://www.adafruit.com/products/931
Are these reported to work with teensy 3.0?
(I couldn't find info for these on teensy forum).
Thanks!
http://www.adafruit.com/products/772
or
http://www.adafruit.com/products/931
Are these reported to work with teensy 3.0?
(I couldn't find info for these on teensy forum).
Thanks!
- adafruit_support_mike
- Posts: 67485
- Joined: Thu Feb 11, 2010 2:51 pm
Re: I2C LCD for Teensy 3.0
Either one will work. Both have I2C interfaces, and the Teensy can definitely handle that.
- michaelmeissner
- Posts: 1830
- Joined: Wed Aug 29, 2012 12:40 am
Re: I2C LCD for Teensy 3.0
I believe the 0.96" Oled display will work: http://www.adafruit.com/products/326. I used a similar OLED with the Adafruit library until I damaged it when I was trying to solder pins to it.
I've also used 2 digi-ole displays, though mostly I use a serial connection instead of i2c (note, you have to use their library and make a small modification to make it work on Teensy 3.0):
I've also used 2 digi-ole displays, though mostly I use a serial connection instead of i2c (note, you have to use their library and make a small modification to make it work on Teensy 3.0):
- 0.96" OLED: http://www.digole.com/index.php?productID=527
- 2.7" LCD: http://www.digole.com/index.php?productID=844
Please be positive and constructive with your questions and comments.