I was making progress on my neo pixel project when my Teensy 3.1 stopped taking new programs. It shows up as in the system profiler as a usb device but not in the loader. Any ideas?
Thanks
Brian
Teensy 3.1 can't upload
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- Franklin97355
- Posts: 23911
- Joined: Mon Apr 21, 2008 2:33 pm
Re: Teensy 3.1 can't upload
You could try the Teensy site https://www.pjrc.com/teensy/teensy31.htmlAny ideas?
- lcstyle
- Posts: 76
- Joined: Sun Oct 26, 2008 10:55 am
Re: Teensy 3.1 can't upload
did you fix your problem?
if the teensy uses the same upload method as arduino micro, see here:
http://forums.adafruit.com/viewtopic.ph ... 15#p247954
if the teensy uses the same upload method as arduino micro, see here:
http://forums.adafruit.com/viewtopic.ph ... 15#p247954
- paulstoffregen
- Posts: 444
- Joined: Sun Oct 11, 2009 11:23 am
Re: Teensy 3.1 can't upload
How does it show up? Can you post a screenshot?
Here's how it's supposed to appear while waiting for an upload. For example, it would appear this way after you've pressed the button but an upload hasn't happened (perhaps because the Teensy Loader isn't running).
The ID numbers are 0x0478 and 0x16c0.
Here's how it's supposed to appear while waiting for an upload. For example, it would appear this way after you've pressed the button but an upload hasn't happened (perhaps because the Teensy Loader isn't running).
The ID numbers are 0x0478 and 0x16c0.
Please be positive and constructive with your questions and comments.