Re: Atmoduino - Ambilight for the masses
i´m playing around with a WS2801 32 LED stripe and Arduino Uno.
Target: Use AtmoWin with Atmoduino!!!
Problem: Test Leds Programm is running fine, no problems.......
Trying tu run Atmoduino on the Arduino brings up the problem.
Frist the LEDs stay dark. After playing around with it i found out that changing the Com port speed to 9600baud brings changes. With different speed the LEDs are flickering around.
When i use the color changer mode in AtmoWin i see some leds going on showing colours some leds stay out.
Yesterday only the first 5 Leds turns on and the rest 27 Leds stay dark.
So i see that the stripe is reacting to the controll commands but it does not do the correct display of the color.
When switching the AtmoWin mode to Static color the stripe freeze but does not display the static color...........
So i think there is a problem with the data transfer between the PC and the Arduino Com Port.
Do anybody know about that problem? What can i do to get it to work correctly?