i need please the spc sheet for this item 787
we are cutting out a stainless steel box now and cannot locate the size on this site
coin 787 acceptor
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
-
adafruit_support_bill
- Posts: 88141
- Joined: Sat Feb 07, 2009 10:11 am
Re: coin 787 acceptor
The spec sheet doesn't have a dimensioned drawing. I can measure one up for you later this afternoon. If there are any critical dimensions you need, let me know and I will be sure to get them.
-
adafruit_support_bill
- Posts: 88141
- Joined: Sat Feb 07, 2009 10:11 am
Re: coin 787 acceptor
The faceplate is 64mm x 124mm
Bolts holes are 4mm and spaced 51mm horizontally & 103mm vertically
Minimum panel opening: 48.5mm x 106.5mm
Depth behind panel: 112mm.
Bolts holes are 4mm and spaced 51mm horizontally & 103mm vertically
Minimum panel opening: 48.5mm x 106.5mm
Depth behind panel: 112mm.
Please be positive and constructive with your questions and comments.