Hi
I have got a new arduino last week and its not responding.
Im running windows xp
and arduino on com 2.
PLEASE HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
arduino uno r3 is not responding
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_bill
- Posts: 88093
- Joined: Sat Feb 07, 2009 10:11 am
Re: arduino uno r3 is not responding
Please be more specific. Does your computer recognize it as a USB device when you plug it in? Check in the Device Manager to make sure.
- adafruit_support_rick
- Posts: 35092
- Joined: Tue Mar 15, 2011 11:42 am
Re: arduino uno r3 is not responding
You should also review these instructions carefully:
http://arduino.cc/en/Guide/Windows
Be particularly careful in the section on installing drivers.
There are step-by-step screenshots of the driver installation on XP here:
http://arduino.cc/en/Guide/UnoDriversWindowsXP
http://arduino.cc/en/Guide/Windows
Be particularly careful in the section on installing drivers.
There are step-by-step screenshots of the driver installation on XP here:
http://arduino.cc/en/Guide/UnoDriversWindowsXP
- fmbfla
- Posts: 110
- Joined: Fri Jun 08, 2012 6:48 pm
Re: arduino uno r3 is not responding
First, get a Fire extinguisher. Then check if you have an "ARDUINO COMPATIBLE"
Then post back here what you have and be more SPECIFIC. (Did you Introduce your self?. were you dressed when you plugged it in?)............
Then post back here what you have and be more SPECIFIC. (Did you Introduce your self?. were you dressed when you plugged it in?)............
-
- Posts: 13
- Joined: Fri Jun 29, 2012 7:39 am
Re: arduino uno r3 is not responding
Hi
I have tried to upload using Flowol 4 and it worked. And when I was using the leatest Arduino software but it isnt working now I dont know whats wrong.
Arduino UNO R3
COM 3
Win XP
thanks
I have tried to upload using Flowol 4 and it worked. And when I was using the leatest Arduino software but it isnt working now I dont know whats wrong.
Arduino UNO R3
COM 3
Win XP
thanks
- adafruit_support_bill
- Posts: 88093
- Joined: Sat Feb 07, 2009 10:11 am
Re: arduino uno r3 is not responding
What error message do you see? Please post the exact text.
Have you checked in DeviceManager to make sure you are using the right COM port?
Do you have Arduino UNO selected in Tools->Board?
Have you checked in DeviceManager to make sure you are using the right COM port?
Do you have Arduino UNO selected in Tools->Board?
-
- Posts: 13
- Joined: Fri Jun 29, 2012 7:39 am
Re: arduino uno r3 is not responding
Yes everything is corrent
-
- Posts: 13
- Joined: Fri Jun 29, 2012 7:39 am
Re: arduino uno r3 is not responding
But it dosent work
- adafruit_support_bill
- Posts: 88093
- Joined: Sat Feb 07, 2009 10:11 am
Re: arduino uno r3 is not responding
We can't diagnose the problem unless you give us more information.But it dosent work
If there is an error message, post the complete text.
-
- Posts: 13
- Joined: Fri Jun 29, 2012 7:39 am
Re: arduino uno r3 is not responding
Hi
My arduino is not responding is it mabye because i have touched the circuit on the board
help please!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
My arduino is not responding is it mabye because i have touched the circuit on the board
help please!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
- adafruit_support_rick
- Posts: 35092
- Joined: Tue Mar 15, 2011 11:42 am
Re: arduino uno r3 is not responding
We can't diagnose the problem unless you give us more information.
If there is an error message, post the complete text.
What kind of computer are you using?
Is there anything attached to the UNO?
If there is an error message, post the complete text.
What kind of computer are you using?
Is there anything attached to the UNO?
-
- Posts: 13
- Joined: Fri Jun 29, 2012 7:39 am
Re: arduino uno r3 is not responding
Hi
Everything is correct but it dosent recieve and send data is it because I have touched the circuit board with bare fingers if yes then how can i clean it with t-shirt or how
Everything is correct but it dosent recieve and send data is it because I have touched the circuit board with bare fingers if yes then how can i clean it with t-shirt or how
- adafruit_support_rick
- Posts: 35092
- Joined: Tue Mar 15, 2011 11:42 am
Re: arduino uno r3 is not responding
Touching the circuit with bare fingers will not damage it. Other than that, I can't help you unless you give me more information.
What are you trying to send data to?
What is connected to the UNO?
How is the UNO powered?
Are you getting any error messages? Post any error messages you are seeing.
What kind of computer are you using?
What are you trying to send data to?
What is connected to the UNO?
How is the UNO powered?
Are you getting any error messages? Post any error messages you are seeing.
What kind of computer are you using?
-
- Posts: 13
- Joined: Fri Jun 29, 2012 7:39 am
Re: arduino uno r3 is not responding
Hi guys
Thanks for your help but I have figured it my self that it was a problem in the com port but now Im running on com100 and it works because my laptop uses from 1 to 20 com ports
Thanks for your help anyway
Bye
P.S. keep this forum for anybodys help and sorry for my spelling bye
Thanks for your help but I have figured it my self that it was a problem in the com port but now Im running on com100 and it works because my laptop uses from 1 to 20 com ports
Thanks for your help anyway
Bye
P.S. keep this forum for anybodys help and sorry for my spelling bye
Please be positive and constructive with your questions and comments.