- Code: Select all
avrdude: jtagmkII_setparm(): bad response to set parameter command:RSP_FAILED
avrdude: jtagmkII_getsync(): ISP activation failed, trying debugWire
avrdude: jtagmkII_setparm(): bad response to set parameter command:RSP_DEBUGWIRE_SYNC_FAILED
avrdude: failed to sync with the AVR Dragon in ISP mode
avrdude: jtagmkII_close(): timeout/error communicating with programmer (status -1)
I also ran a program called AVRFuses to read the fuses on the part and this failed as well.
So, I grabbed a known good mega328, plugged it in and retried. It worked fine. I was able to program the Blink example and see the LED on the Boarduino blink normally. I also verified that the AVRFuses program could read the fuses while the part was plugged into the Boarduino. Seems like I have a bad mega328? Are there other things I should try to see what the problem might be?
I've sent in a request for a new 328.
PS - I'm really happy with the small size and functionality of the Boarduino. I look forward to using it to breadboard my projects!