HELP: 2.8 tft touch shield touchscreen wont response and sdslot wont work
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
-
- Posts: 4
- Joined: Thu Aug 29, 2013 12:05 pm
HELP: 2.8 tft touch shield touchscreen wont response and sdslot wont work
I just got my shield by ups deliferd but it touchscreen wond responde and SD slot wond work can i repiar it myself/send it to adafruit and ask for a new one????
- Franklin97355
- Posts: 23912
- Joined: Mon Apr 21, 2008 2:33 pm
Re: HELP: 2.8 tft touch shield touchscreen wont response and sdslot wont work
It would really help if you could explain "wont work" in more detail. As to repairing something if you could also explain that, tell us what you have done and include pictures (big clear ones) that will help.
- adafruit_support_bill
- Posts: 88093
- Joined: Sat Feb 07, 2009 10:11 am
Re: HELP: 2.8 tft touch shield touchscreen wont response and sdslot wont work
Please tell us more about your configuration and what you have tried:
What Arduino board are you using?
What version of the Arduino IDE are you using?
Which example sketches have you tested with?
What Arduino board are you using?
What version of the Arduino IDE are you using?
Which example sketches have you tested with?
-
- Posts: 4
- Joined: Thu Aug 29, 2013 12:05 pm
Re: HELP: 2.8 tft touch shield touchscreen wont response and
Arduino UNO rev3 on mac osx mountainloin/loin and the paint exampleadafruit_support_bill wrote:Please tell us more about your configuration and what you have tried:
What Arduino board are you using?
What version of the Arduino IDE are you using?
Which example sketches have you tested with?
the version is: 1.0.5
-
- Posts: 4
- Joined: Thu Aug 29, 2013 12:05 pm
Re: HELP: 2.8 tft touch shield touchscreen wont response and
o and the sd card list files example sorry forgot aubot it
- adafruit_support_bill
- Posts: 88093
- Joined: Sat Feb 07, 2009 10:11 am
Re: HELP: 2.8 tft touch shield touchscreen wont response and
First, make sure you are running the shield version of the paint example.
When you run the tftpaintshield sketch, what do you see in the serial monitor?
For the SD card examples, make sure that you change the chip-select pin to pin 5 in the code.
Post the serial monitor output from that one too.
When you run the tftpaintshield sketch, what do you see in the serial monitor?
For the SD card examples, make sure that you change the chip-select pin to pin 5 in the code.
Post the serial monitor output from that one too.
-
- Posts: 4
- Joined: Thu Aug 29, 2013 12:05 pm
Re: HELP: 2.8 tft touch shield touchscreen wont response and
i already checked the version whas right
so i wand to send it back cose it still wont work
so i wand to send it back cose it still wont work
- adafruit_support_bill
- Posts: 88093
- Joined: Sat Feb 07, 2009 10:11 am
Re: HELP: 2.8 tft touch shield touchscreen wont response and
When you run the tftpaintshield sketch, what do you see in the serial monitor?
For the SD card examples, make sure that you change the chip-select pin to pin 5 in the code.
Post the serial monitor output from that one too.
For the SD card examples, make sure that you change the chip-select pin to pin 5 in the code.
Post the serial monitor output from that one too.
Please be positive and constructive with your questions and comments.