I have a very similar problem as posted here
http://forums.adafruit.com/viewtopic.php?f=25&t=34514
I first tried to serial read and write to the board. While loading the Rx Tx LEDs next to the programming port and the code looks to upload successfully but then nothing happens except the ON and L LEDs are on. I then tried the blink example and again nothing happens after it looks like it successfully uploads except the ON and L LEDs are on. All the pins of the board are at 2.7V that i tested (2,7,13 even Rx0, Tx0, Tx1, Rx1, Tx3).
I'm using IDE version 1.5.4 and windows 8.
When uploading the Blink sketch it says:
Sketch uses 10,076 bytes (1%) of program storage space. Maximum is 524,288 bytes.
Erase flash
Write 10156 bytes to flash
[ ] 0% (0/40 pages)
[======= ] 25% (10/40 pages)
[=============== ] 50% (20/40 pages)
[====================== ] 75% (30/40 pages)
[==============================] 100% (40/40 pages)
Verify 10156 bytes of flash
[ ] 0% (0/40 pages)
[======= ] 25% (10/40 pages)
[=============== ] 50% (20/40 pages)
[====================== ] 75% (30/40 pages)
[==============================] 100% (40/40 pages)
Verify successful
Set boot flash true
CPU reset.
It looks like other people have this same problem here:
http://forum.arduino.cc/index.php/topic,133269.0.html
but I dont see anyone that has an answer to fix it.
Arduino Due will upload but not respond to any Sketches
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- kylel1
- Posts: 1
- Joined: Mon Mar 11, 2013 1:40 pm
- adafruit_support_rick
- Posts: 35092
- Joined: Tue Mar 15, 2011 11:42 am
Re: Arduino Due will upload but not respond to any Sketches
It does sound similar to the other thread. Let's try replacing the Due. Please email [email protected] with a link to this thread.
- ms14
- Posts: 1
- Joined: Thu Jun 19, 2014 11:24 am
Re: Arduino Due will upload but not respond to any Sketches
June 19, 2014
I have the same problem with both Due's giving an identical response
as the above to the same effort; and would like a solution.
It would also be good to know how to determine which Dues are defective.
Is there a date stamp on them? What changed?
Why were those which replaced finally work?
Thank you.
I have the same problem with both Due's giving an identical response
as the above to the same effort; and would like a solution.
It would also be good to know how to determine which Dues are defective.
Is there a date stamp on them? What changed?
Why were those which replaced finally work?
Thank you.
- adafruit_support_rick
- Posts: 35092
- Joined: Tue Mar 15, 2011 11:42 am
Re: Arduino Due will upload but not respond to any Sketches
When did you purchase these Due's? We have a 30-day replacement policy.
-
- Posts: 12151
- Joined: Thu Apr 06, 2006 4:21 pm
Re: Arduino Due will upload but not respond to any Sketches
hey folks, we (adafruit) called this customer - he did not purchase these DUE units from us.
Please be positive and constructive with your questions and comments.