Hi!
I have built a simple Arduino (Trinket) circuit that controls strip LED's with a single momentary pushbutton.
I'm running both from a battery.
Is there anyway to switch the ATtiny85 completely off and then wake it up without using a second mechanical switch? - some sort of circuit design?
My issue is battery consumption even using the power saving modes available on the chip.
Thank you!
ATtiny85 switch off?
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- Franklin97355
- Posts: 23911
- Joined: Mon Apr 21, 2008 2:33 pm
Re: ATtiny85 switch off?
It adds parts but this is the idea. http://www.mosaic-industries.com/embedd ... wer-switch
Or you could just get this https://www.adafruit.com/product/1400
Or you could just get this https://www.adafruit.com/product/1400
-
- Posts: 8
- Joined: Thu Jun 26, 2014 7:38 pm
Re: ATtiny85 switch off?
Franklin! Thank you for your help again =)
This points me in the right direction.
This points me in the right direction.
Please be positive and constructive with your questions and comments.