ok.
i'll look for it. thanks again
mod kits for x0xb0x, TB-303 or ML303
Moderators: altitude, adafruit_support_bill, adafruit, phono, hamburgers
Please be positive and constructive with your questions and comments.
-
- Posts: 1
- Joined: Tue Oct 22, 2013 5:32 am
Re: mod kits for x0xb0x, TB-303 or ML303
Hello,
I have two questions : 1) Is the delay mod also applicable for the ACID Code ML 303 v4 ?
2) Do you still have the 2 VCO kit, so I could order it and mod my ML 303.
Thank you!
Marcus
I have two questions : 1) Is the delay mod also applicable for the ACID Code ML 303 v4 ?
2) Do you still have the 2 VCO kit, so I could order it and mod my ML 303.
Thank you!
Marcus
- substyler
- Posts: 428
- Joined: Tue Dec 02, 2008 6:29 pm
Re: mod kits for x0xb0x, TB-303 or ML303
hi Marcus,
as I'm not longer the owner of x0xsh0p you should ask Andreas from x0xsh0p.
just drop him a mail.
cheers,
Sub
ps. the delay mod is applicable for your Acidcode machine and the 2VCO mod too.
as I'm not longer the owner of x0xsh0p you should ask Andreas from x0xsh0p.
just drop him a mail.
cheers,
Sub
ps. the delay mod is applicable for your Acidcode machine and the 2VCO mod too.
- aminoacid
- Posts: 352
- Joined: Tue Jun 20, 2006 5:27 am
Re: mod kits for x0xb0x, TB-303 or ML303
Hi Chris.
I just found a delay kit from you that i never installed in a xox a while ago.
I thought of putting it together now, but in a separate pedal box kind of thing and use it on sends with my mixer..
That shouldnt be any problem right?
Thoose pt chips are cool.
Is it possible to extend the delay time range?
Hope you are doing fine!
I just found a delay kit from you that i never installed in a xox a while ago.
I thought of putting it together now, but in a separate pedal box kind of thing and use it on sends with my mixer..
That shouldnt be any problem right?
Thoose pt chips are cool.
Is it possible to extend the delay time range?
Hope you are doing fine!
- aminoacid
- Posts: 352
- Joined: Tue Jun 20, 2006 5:27 am
Re: mod kits for x0xb0x, TB-303 or ML303
I bought A blue transparent box yesterday and assembled the effect.
I hooked one side of the switch to one pin of level pot, this way i can switch between dry/wet and just wet.
How ever, the signal could prob be stronger and the hi-end is very rolled of. Is there a lp filter in the circuit?
I hooked one side of the switch to one pin of level pot, this way i can switch between dry/wet and just wet.
How ever, the signal could prob be stronger and the hi-end is very rolled of. Is there a lp filter in the circuit?
Please be positive and constructive with your questions and comments.