For people tired of those crappy jumper ribbon cables, I'm selling sets of .100 MTA crimped and ready-to-install wires: $15 shipped in the USA (add $5 for shipping wolrdwide).
Here's a less-than-perfect iPhone picture of a single assembly:
You just solder the male connectors on your board (mind the header/connector orientation with regards to pin "1"), and connect/disconnect as you need during testing/assembly. The single, off-colored wire corresponds to pin "1" for any of your jumpers. 6-pin sizes are not pictured, but will be available for the 12-pin connector near the uC.
PM me to purchase a set.
FS: ready-to-install molex wiring kits
Moderators: altitude, adafruit_support_bill, adafruit, phono, hamburgers
Please be positive and constructive with your questions and comments.
-
- Posts: 100
- Joined: Thu Aug 25, 2005 11:43 am
Re: FS: ready-to-install molex wiring kits
Hurrah! I just made some of these otherwise I'd have ordered a set, I'd definately recommend people use these as the advantages are huge. I only wish you'd offered these 2 weeks ago before I went through the torture of the crimp on type I used
- computer controlled
- Posts: 714
- Joined: Fri May 06, 2005 5:48 pm
Re: FS: ready-to-install molex wiring kits
Cool! I may grab a set soon.
- dnigrin
- Posts: 123
- Joined: Fri May 15, 2009 5:24 pm
Re: FS: ready-to-install molex wiring kits
To clarify: is the $15 for just the 3 pin connector set, or for that *plus* two 6 pin connector sets?
-
- Posts: 100
- Joined: Thu Aug 25, 2005 11:43 am
Re: FS: ready-to-install molex wiring kits
For modding these are pretty much essential IMHO, I have removed and reconnected mine dozens of times, makes it so much easier to work on.
- hamburgers
- Posts: 1058
- Joined: Wed Dec 21, 2005 8:25 pm
Re: FS: ready-to-install molex wiring kits
It's for everything you need for one x0xb0x--you can use all 3 pins, or combination of 3s and 6s, I have both styles of header.dnigrin wrote:To clarify: is the $15 for just the 3 pin connector set, or for that *plus* two 6 pin connector sets?
Please be positive and constructive with your questions and comments.