I'm having some issues with the Waveshield. I've completed the soldering process, formatted the SD card, loaded a properly formatted wave file, and have confirmed that the Arduino is communicating with the Waveshield (using the serial monitor and the example code for playing a wave, picture below).
Furthermore, I've used a multimeter on every single connection and have confirmed that there are no cold solders or bridges. Any suggestions or thoughts? Also I've tried using headphones and a speaker that came with the kit but no luck.
One more thing - I've added two LEDs with 1k resistors but don't know how to activate them in the Arduino code. Any advice would be much appreciated.
Attached are images of the board
Thank you,
DANMDaniel
Waveshield is not producing sound
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
-
- Posts: 24
- Joined: Sun Oct 17, 2010 7:24 pm
Waveshield is not producing sound
Last edited by DANMDaniel on Sun Oct 17, 2010 10:22 pm, edited 2 times in total.
- mitpatterson
- Posts: 196
- Joined: Mon Aug 02, 2010 11:45 pm
Re: Waveshield is not producing sound
This should be under Arduino Shields so if an admin can move it that would be great
-
- Posts: 24
- Joined: Sun Oct 17, 2010 7:24 pm
Re: Waveshield is not producing sound
thanks for your reply - I tried to post this forum in arduino shields however, i was unable to post a topic in any other field other than general help
-
- Posts: 12151
- Joined: Thu Apr 06, 2006 4:21 pm
Re: Waveshield is not producing sound
post clear photos so we can see any problems
-
- Posts: 24
- Joined: Sun Oct 17, 2010 7:24 pm
Re: Waveshield is not producing sound
ok thank you
-
- Posts: 12151
- Joined: Thu Apr 06, 2006 4:21 pm
Re: Waveshield is not producing sound
they're still very dark. you should check the orientation of the DAC and opamp. make sure they are the right way and the right part
-
- Posts: 24
- Joined: Sun Oct 17, 2010 7:24 pm
Re: Waveshield is not producing sound
Issue resolved - one cold solder in the DAC.
Any advice regarding code to get the LEDs to light up?
Thank you,
DANM Daniel
Any advice regarding code to get the LEDs to light up?
Thank you,
DANM Daniel
-
- Posts: 12151
- Joined: Thu Apr 06, 2006 4:21 pm
Please be positive and constructive with your questions and comments.