I'm using the following:
Arduino mega 2560
Wave Shield 1.1
SD 2GB - PNY Optima
Windows xp and win 7
When I run SdReadTest I get the following errors.
First time I run it:
card.init failed
SD error
errorCode: 1
errorData: FF
Second time I test it
card.init failed
SD error
errorCode: 1
errorData: 0
I have the WaveHC file in this location:
path\arduino-0022\libraries\WaveHC
I had a friend check my soldering, and he says it looks good, and that shouldn't be the problem. I'm new at this so I dont know if this helps, but when I press the reset button on it, I notice the light blinks on the arduino, so there's some communication going on.
Anything else I should check?
Thanks in advance, Scott
Arduino mega 2560 and Wave Shield -ErrorData
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_bill
- Posts: 88154
- Joined: Sat Feb 07, 2009 10:11 am
Re: Arduino mega 2560 and Wave Shield -ErrorData
Have you seen this thread? http://forums.adafruit.com/viewtopic.php?f=31&t=14385
-
- Posts: 10
- Joined: Sun Mar 20, 2011 12:03 am
Re: Arduino mega 2560 and Wave Shield -ErrorData
I've seen quite a few postings, but not that one. I'll give it a try later this week. Thanks for pointing it out.
Scott
Scott
-
- Posts: 10
- Joined: Sun Mar 20, 2011 12:03 am
Re: Arduino mega 2560 and Wave Shield -ErrorData
Thanks for pointing me in the right direction. I was able to get it working after following the thread you sent me.
Scott
Scott
Please be positive and constructive with your questions and comments.