Hi,
I have just built the Data logger.
I have a couple of problem.
1. Using the sample RTC programs return nonsense to the serial port e.g
bgæÂÏŽÿVÈá•BANNED[þbGæÂÏŽÿr“Bè¨rM
2. Using the SD examples I get
Initializing SD card...initialization failed!
Not sure if this is because I have a 4GB card. Going to try a smaller one.
Steve
Logger RTC Nonsense
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_bill
- Posts: 88096
- Joined: Sat Feb 07, 2009 10:11 am
Re: Logger RTC Nonsense
Make sure that the baud rate of your serial monitor matches the baud rate that you use in Serial.begin in your sketch.1. Using the sample RTC programs return nonsense to the serial port e.g
If the smaller card doesn't work. post photos of the front & back of the card and we'll take a look for any assembly problems.2. Using the SD examples I get
Initializing SD card...initialization failed!
-
- Posts: 2
- Joined: Sun Sep 04, 2011 5:00 pm
Re: Logger RTC Nonsense
Thanks.
Works great now for RTC
and SD card is Initializing with 2GB card.
Steve
Works great now for RTC
and SD card is Initializing with 2GB card.
Steve
Please be positive and constructive with your questions and comments.