Hi, I recently purchase Stepper motor - 200 steps/rev, 12V 350mA -
ID: 324
Can any one here provide me some help on color code. This motor have 4 wires, red, yellow, green, and brown.
324 stepper motor color code
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_bill
- Posts: 88093
- Joined: Sat Feb 07, 2009 10:11 am
Re: 324 stepper motor color code
It is listed in the product description:
To connect to our shield, put the wires in this order: Red, Yellow, skip ground, Green, Brown
-
- Posts: 2
- Joined: Thu May 24, 2012 11:04 pm
Re: 324 stepper motor color code
Hi, I did not have shield board, I purchased your motor for difference board.
so you can provide me some help of color code.
Will it be some thing like red A, yellow /A, green B brown /B.
Thanks
so you can provide me some help of color code.
Will it be some thing like red A, yellow /A, green B brown /B.
Thanks
- adafruit_support_bill
- Posts: 88093
- Joined: Sat Feb 07, 2009 10:11 am
Re: 324 stepper motor color code
Yes. That's right.Will it be some thing like red A, yellow /A, green B brown /B.
- fortis208
- Posts: 3
- Joined: Mon May 08, 2017 1:21 am
Re: 324 stepper motor color code
I also have the same problem, I purchased Stepper Motor HAT and a stepper motor with wires (Black, Green, Red, Blue) in the specification, it says Black ---- Green, Red --- Blue. Now I don't know where to connect those wires on the board. Please, I need help. Thanks!
BTW, the stepper motor is Nema 17HS16-2004S1.
BTW, the stepper motor is Nema 17HS16-2004S1.
- adafruit_support_bill
- Posts: 88093
- Joined: Sat Feb 07, 2009 10:11 am
Re: 324 stepper motor color code
That motor is not compatible with the HAT. It has a very low (1.1 ohm) phase resistance - indicating that it is intended for use with a current limiting 'chopper' driver.the stepper motor is Nema 17HS16-2004S1.
https://learn.adafruit.com/all-about-st ... he-stepper
https://learn.adafruit.com/current-limi ... th-drv8871
- fortis208
- Posts: 3
- Joined: Mon May 08, 2017 1:21 am
Re: 324 stepper motor color code
We are new to using the stepper motor, since we have this Stepper Motor HAT and the motor, what can you suggest for us to do?
Thank you very much for the help..
Thank you very much for the help..
- adafruit_support_bill
- Posts: 88093
- Joined: Sat Feb 07, 2009 10:11 am
Re: 324 stepper motor color code
The options are to use a different motor, or use a different driver.
This motor works well with the HAT: https://www.adafruit.com/product/324
The DRV8871 is capable of driving the 17HS16-2004S1 motors you currently have. https://learn.adafruit.com/current-limi ... th-drv8871
This motor works well with the HAT: https://www.adafruit.com/product/324
The DRV8871 is capable of driving the 17HS16-2004S1 motors you currently have. https://learn.adafruit.com/current-limi ... th-drv8871
- fortis208
- Posts: 3
- Joined: Mon May 08, 2017 1:21 am
Re: 324 stepper motor color code
We will purchase this motor. Thank you very much!
Please be positive and constructive with your questions and comments.