Hi. I am prototyping a GPS device using the Ultimate GPS Breakout with a 3.3 v micro controller and 3.3 v lcd screen and the GPS module is amazing with its built in 3.3 v regulator. I am planning on making the whole device with SMDs and don't know the schematic/circuit of the breakout board.
If I could have a copy of it, that would be appreciated!
Thanks!
Ultimate GPS Breakout Schematic?
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
-
- Posts: 12151
- Joined: Thu Apr 06, 2006 4:21 pm
-
- Posts: 16
- Joined: Mon Nov 01, 2010 4:02 pm
Re: Ultimate GPS Breakout Schematic?
Hi!
I downloaded this and tried to open it, unfortunately it won't open. Is it a possible version conflict? I'm running 5.10.0.
Thanks!
I downloaded this and tried to open it, unfortunately it won't open. Is it a possible version conflict? I'm running 5.10.0.
Thanks!
-
- Posts: 12151
- Joined: Thu Apr 06, 2006 4:21 pm
Re: Ultimate GPS Breakout Schematic?
use version 6
-
- Posts: 15
- Joined: Wed Sep 30, 2009 6:20 am
Re: Ultimate GPS Breakout Schematic?
...please tell me when the expected arrival at the warehouse :
Adafruit Ultimate GPS Breakout - 66 channel w/10 Hz updates ?
Adafruit Ultimate GPS Breakout - 66 channel w/10 Hz updates ?
-
- Posts: 12151
- Joined: Thu Apr 06, 2006 4:21 pm
Re: Ultimate GPS Breakout Schematic?
our current ETA to have these back in stock is 2-3 weeks. make sure to up on the product page to be notified when they're back in stock too.vvs wrote:...please tell me when the expected arrival at the warehouse :
Adafruit Ultimate GPS Breakout - 66 channel w/10 Hz updates ?
thanks,
adafruit support, phil
-
- Posts: 15
- Joined: Mon May 08, 2006 7:53 pm
Re: Ultimate GPS Breakout Schematic?
Hi.adafruit wrote:here you go https://github.com/adafruit/Adafruit-Ultimate-GPS
These files are great, but are for v2 of the Ultimate GPS Breakout.
I just bought the v3 and I am trying to install it in a home-made PCB.
I think v2 and v3 are not pin-compatible.
Is that right?
I would appreciate if you could upload to github the files of the latest version.
Thank you very much.
-
- Posts: 12151
- Joined: Thu Apr 06, 2006 4:21 pm
Re: Ultimate GPS Breakout Schematic?
files will be up shortly! we're moving around things on our new documentation system and updating them!
cheers,
adafruit support, phil
cheers,
adafruit support, phil
-
- Posts: 12151
- Joined: Thu Apr 06, 2006 4:21 pm
Re: Ultimate GPS Breakout Schematic?
Other than the extra PPS pin on the right side, they are pin compatiblesimon_stz wrote:Hi.adafruit wrote:here you go https://github.com/adafruit/Adafruit-Ultimate-GPS
These files are great, but are for v2 of the Ultimate GPS Breakout.
I just bought the v3 and I am trying to install it in a home-made PCB.
I think v2 and v3 are not pin-compatible.
Is that right?
I would appreciate if you could upload to github the files of the latest version.
Thank you very much.
- madhunm
- Posts: 41
- Joined: Thu Dec 16, 2010 6:06 pm
Re: Ultimate GPS Breakout Schematic?
Hello,
I am just following up on the below:
Also, is there any plans for a shield version of this?
Thanks,
Madhu.
I am just following up on the below:
Are the files available for download?by adafruit » 20 Aug 2012 15:11
files will be up shortly! we're moving around things on our new documentation system and updating them!
cheers,
adafruit support, phil
Also, is there any plans for a shield version of this?
Thanks,
Madhu.
-
- Posts: 12151
- Joined: Thu Apr 06, 2006 4:21 pm
Re: Ultimate GPS Breakout Schematic?
they'll be going up shortly, we're also working on a shield version (no ETA, but it's in the works!).madhunm wrote:Are the files available for download? Also, is there any plans for a shield version of this? Thanks,Madhu.
cheers,
adafruit support, phil
-
- Posts: 15
- Joined: Mon May 08, 2006 7:53 pm
-
- Posts: 1
- Joined: Sun Aug 03, 2014 1:20 am
Re: Ultimate GPS Breakout Schematic?
I downloaded Eagle 6 and these files. I tried opening the .sch file in Eagle, but it said this was not an Eagle file.
- ersatzavian
- Posts: 2
- Joined: Sat Dec 06, 2014 11:29 am
Re: Ultimate GPS Breakout Schematic?
Just tried opening the rev3 schematic file with Eagle 6.4, no joy. "Error, line 6 column 34, not an Eagle file". Looks like a trailing non-printable character on line 6?
<setting alwaysvectorfont="yes"/>
<setting alwaysvectorfont="yes"/>
- ersatzavian
- Posts: 2
- Joined: Sat Dec 06, 2014 11:29 am
Re: Ultimate GPS Breakout Schematic?
Ah! Scratch that. Here's what's happening.
If you right-click the .sch file from the top-level repo page and click "save link as", the resulting saved file is the source for the *github web page that shows the text of the Eagle file*. Which Eagle won't open the way you want.
Instead, click the .sch file, then right click the "raw" button and click "save link as". That gives you your file and *just* your file. Eagle will then cooperate.
If you right-click the .sch file from the top-level repo page and click "save link as", the resulting saved file is the source for the *github web page that shows the text of the Eagle file*. Which Eagle won't open the way you want.
Instead, click the .sch file, then right click the "raw" button and click "save link as". That gives you your file and *just* your file. Eagle will then cooperate.
Please be positive and constructive with your questions and comments.