Hello, I am looking to buy the thermocouple amplifier MAX31855 Breakout Board (MAX6675 update) and I wonder if the thermocouple selling for you, this or this link in the MAX31855 thermocouple amplifer goes up to 1000 degrees Celsius (temperature of Brazil). If not, what would you use the thermocouple with the thermocouple amplifier MAX31855 Breakout Board (MAX6675 update) to measure 1000 degrees celsius?
Grateful for the attention.
Thermocouple amplifier MAX31855 Breakout Board (MAX6675 update) - help
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
-
- Posts: 2
- Joined: Fri Nov 23, 2012 3:00 pm
- adafruit_support_bill
- Posts: 88096
- Joined: Sat Feb 07, 2009 10:11 am
Re: Thermocouple amplifier MAX31855 Breakout Board (MAX6675 update) - help
Any K-type thermocouple will work with the MAX31855. But to operate at that temperature, you need a special probe with ceramic insulation. They are available from Omega: http://www.omega.com/ppt/pptsc.asp?ref=XC&Nav=tema06
-
- Posts: 9
- Joined: Wed Dec 12, 2012 10:07 am
Re: Thermocouple amplifier MAX31855 Breakout Board (MAX6675 update) - help
Hi there
can a K type thermocuple read below zero ºC temperatures accuratly ?
I need to go till 77 K liquid nitrogen
thanks
can a K type thermocuple read below zero ºC temperatures accuratly ?
I need to go till 77 K liquid nitrogen
thanks
- adafruit_support_rick
- Posts: 35092
- Joined: Tue Mar 15, 2011 11:42 am
Re: Thermocouple amplifier MAX31855 Breakout Board (MAX6675 update) - help
K-types go down to -200C. Here's a good discussion of thermocouples:
http://www.omega.com/prodinfo/ThermocoupleSensor.html
http://www.omega.com/prodinfo/ThermocoupleSensor.html
-
- Posts: 9
- Joined: Wed Dec 12, 2012 10:07 am
Re: Thermocouple amplifier MAX31855 Breakout Board (MAX6675 update) - help
thanks a lot Driverblock (im such a fist time user of this stuff)
So I have another question maybe you know the answer,
If I buy a thermocouple, a Max31855 chip and I upload to the Arduino Uno the Adafruit library, do I have to somehow calibrate the thermocouple ? or is it ready to use because of the software buy adafruit ?
So I have another question maybe you know the answer,
If I buy a thermocouple, a Max31855 chip and I upload to the Arduino Uno the Adafruit library, do I have to somehow calibrate the thermocouple ? or is it ready to use because of the software buy adafruit ?
- adafruit_support_bill
- Posts: 88096
- Joined: Sat Feb 07, 2009 10:11 am
Re: Thermocouple amplifier MAX31855 Breakout Board (MAX6675 update) - help
All thermocouples need to be calibrated against a reliable reference temperature. Omega has some good white-papers on calibration techniques.
Please be positive and constructive with your questions and comments.