by mechatronicsfanatic on Tue Nov 27, 2012 5:29 pm

Good afternoon everyone,
I have a few questions and concerns about using the datalogging shield with a eyefi card &TTL Serial JPEG Camera with my arduino Uno.I'm doing alot with a robot I'm building using an infrared sensor, a servo two motors and h-bridge. My main concern is with the amount of pins that the datalogging shield and sd card uses I won't have enough digital pins left for my SN754410NE h-bridge that will two motors and servo .Is it possible to use a Mega board? Thanks.
mechatronicsfanatic
 
Posts: 2
Joined: Tue Nov 27, 2012 5:15 pm

by adafruit_support_bill on Tue Nov 27, 2012 5:59 pm

Yes. It is possible to use the data logging shield with the Mega. viewtopic.php?f=31&t=27245&p=171243
User avatar
adafruit_support_bill
 
Posts: 25319
Joined: Sat Feb 07, 2009 9:11 am

by mechatronicsfanatic on Tue Nov 27, 2012 7:27 pm

Alright, greatly appreciated I had found it a few pages in after using the search function but thanks.
mechatronicsfanatic
 
Posts: 2
Joined: Tue Nov 27, 2012 5:15 pm