Code doesnt work

[baileygrib]

Screen Shot 2013-01-19 at 7.41.44 PM.png (62.24 KiB) Viewed 541 times

Screen Shot 2013-01-19 at 7.38.21 PM.png (16.74 KiB) Viewed 541 times

Sorry I havent replied i have been stuck at school doing my science competition.
The following pictures are my directory, preferences, and error message that i get when i run the code. I made sure that everything was identical to yours.

Screen Shot 2013-01-19 at 7.37.52 PM.png (67.25 KiB) Viewed 541 times

[adafruit_support_rick]

OK, thanks.

How about a screenshot showing the Adafruit_NFCShield_I2C folder opened up. It should look like this:

Adafruit_NFCShield_I2C.png (82.82 KiB) Viewed 539 times

[baileygrib]

Screen Shot 2013-01-19 at 9.14.08 PM.png (69.23 KiB) Viewed 530 times

[adafruit_support_bill]

Please post the exact text of the sketch you are trying to compile. We are having trouble trying to reproduce the problem here.

[adafruit_support_rick]

Also, try restarting the Arduino IDE.

[baileygrib]

I am trying to compile the read mifare card sketch and I did restart the IDE

[adafruit_support_rick]

Have you made any changes at all to the readmifare sketch? It compiles just fine for us.

In the Sketch:Import LIbrary... menu - does Adafruit_NFCShield_I2C show up in the pop-up list?

[baileygrib]

I don't believe I made any changes to the code and no it doesn't appear in the drop down menu.

[adafruit_support_bill]

That is usually an indication that your library is not installed correctly - although from the screen-shots posted it seems to be in the right place.
Can you post a screenshot of the File->Preferences dialog? Any chance you have changed the default sketchbook location?

[baileygrib]

Screen Shot 2013-01-19 at 7.41.44 PM.png (62.24 KiB) Viewed 365 times

I think this is the picture you're requesting...

[adafruit_support_rick]

And are the library files in that exact directory, like this:?
/Users/sgribben7/Documents/Arduino/libraries/Adafruit_NFCShield_I2C/Adafruit_NFCShield_I2C.cpp
and
/Users/sgribben7/Documents/Arduino/libraries/Adafruit_NFCShield_I2C/Adafruit_NFCShield_I2C.h

[adafruit_support_rick]

Oh, duhhhhhh!!!
Sorry, Bailey - it was looking right at me and I didn't see it.
The path in your preferences is supposed to be the sketchbook location. You've got the path to libraries in there. Change it to look like this:

/Users/sgribben7/Documents/Arduino

Click OK, and then restart the Arduino application.

Thanks for being patient...

[baileygrib]

sorry i havent been online in a while but IT WORKED!! I should have seen that too! thank you so much for all of your help and patience!!
-Bailey

[adafruit_support_rick]

You're welcome! Good luck with your project!