Working Stepper Library for Arduino Due

Adafruit Ethernet, Motor, Proto, Wave, Datalogger, GPS Shields - etc!

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
User avatar
adafruit_support_bill
 
Posts: 88093
Joined: Sat Feb 07, 2009 10:11 am

Re: Working Stepper Library for Arduino Due

Post by adafruit_support_bill »

There is a jumper just above the 3.3v and 5v pins. Cut the small trace between the center pad and the 5v pad and bridge from the center pad to the 3.3v pad with a blob of solder.

User avatar
apurba
 
Posts: 37
Joined: Sat Mar 15, 2014 6:25 am

Re: Working Stepper Library for Arduino Due

Post by apurba »

I am facing problem with arduino due and AF v2 shield. I have uploaded DC motor test and motor is spining in constant speed.
My requirement is to run two DC hobby motor and two hobby servo.
I have modified the shield for 3.3 v.
I have modified wire.h file to put the fux for pwm. What else I need to do?

User avatar
adafruit_support_mike
 
Posts: 67446
Joined: Thu Feb 11, 2010 2:51 pm

Re: Working Stepper Library for Arduino Due

Post by adafruit_support_mike »

Post the code you're using (between CODE tags please) and we'll take a look.

User avatar
apurba
 
Posts: 37
Joined: Sat Mar 15, 2014 6:25 am

Re: Working Stepper Library for Arduino Due

Post by apurba »

Looks like it's working now in Arduino Due, I have compiled the code with Arduino IDE 1.6.3

User avatar
adafruit_support_mike
 
Posts: 67446
Joined: Thu Feb 11, 2010 2:51 pm

Re: Working Stepper Library for Arduino Due

Post by adafruit_support_mike »

Glad to hear it's working for you.

User avatar
ahmedsherif11
 
Posts: 4
Joined: Tue Apr 07, 2015 12:52 am

Re: Working Stepper Library for Arduino Due

Post by ahmedsherif11 »

hayy i have a question about the Motor Shield V1.x . can i run 2 DC motors 12 V at 12V supply and at the same supply run a 4.8V stepper ??? and how can i do it ??? should i change my code ??? or connect something ??? PLEASE help !!!

User avatar
adafruit_support_bill
 
Posts: 88093
Joined: Sat Feb 07, 2009 10:11 am

Re: Working Stepper Library for Arduino Due

Post by adafruit_support_bill »

@BANNED - Your question is not relevant to this topic. You already have started a thread for your unrelated topic. Only one thread per topic please!

User avatar
mohsan_raza
 
Posts: 1
Joined: Sat Aug 22, 2015 10:20 am

Re: Working Stepper Library for Arduino Due

Post by mohsan_raza »

Hi All,

I am new to Arduino. I have Arduino DUE and adafruit motor shield V1.0. My problem is how to attach motor shield to Arduino? I tried google but got no answer.

User avatar
adafruit_support_bill
 
Posts: 88093
Joined: Sat Feb 07, 2009 10:11 am

Re: Working Stepper Library for Arduino Due

Post by adafruit_support_bill »

The V1 motor shield is not compatible with the Due. Only the V2 shield will work with that processor.

User avatar
arjunhunter007
 
Posts: 1
Joined: Sat Dec 12, 2015 7:30 am

Re: Working Stepper Library for Arduino Due

Post by arjunhunter007 »

today i bought a arduino due and adafruit motor shield v1 , but it is not working....wat can i do to operate due with v1 library...
plz itz urgent
anyone send some suggestions or links for compatible libraries

User avatar
adafruit_support_bill
 
Posts: 88093
Joined: Sat Feb 07, 2009 10:11 am

Re: Working Stepper Library for Arduino Due

Post by adafruit_support_bill »

The V1 motor shield is not compatible with the Due. Only the V2 shield will work with that processor.

Locked
Please be positive and constructive with your questions and comments.

Return to “Arduino Shields from Adafruit”