Does the GPS Shield (http://www.adafruit.com/products/1272) work w/ the Arduino Due? I know it says, it doesn't, but the motor shield used to not be compatible w/ Due but now it is.
If it is not compatible w/ Due, can I use http://www.adafruit.com/products/746 ?
GPS Shield & Due
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_rick
- Posts: 35092
- Joined: Tue Mar 15, 2011 11:42 am
Re: GPS Shield & Due
Both the shield and the breakout are technically compatible with the Due, but the Adafruit library and example sketches need considerable modifications to work with the Due.
- garyvdg
- Posts: 91
- Joined: Thu Jul 25, 2013 12:37 pm
Re: GPS Shield & Due
Are you aware of whether any such modifications are available? I too would like to use the Ultimate GPS Logger Shield with a Due.adafruit_support_rick wrote:Both the shield and the breakout are technically compatible with the Due, but the Adafruit library and example sketches need considerable modifications to work with the Due.
- adafruit_support_rick
- Posts: 35092
- Joined: Tue Mar 15, 2011 11:42 am
Re: GPS Shield & Due
I'll try to find some time to port the library. I'm pretty busy right now, so it might take a week or two. I'll post back.
- adafruit_support_rick
- Posts: 35092
- Joined: Tue Mar 15, 2011 11:42 am
Re: GPS Shield & Due
Download the latest version of the Adafruit_GPS library for Arduino Due support
NOTE: Due support is hardcoded for Serial1. You must connect to RX1 and TX1. If you're using the GPS Shield, jumper from shield TX and RX to Due RX1 and TX1.
NOTE: Due support is hardcoded for Serial1. You must connect to RX1 and TX1. If you're using the GPS Shield, jumper from shield TX and RX to Due RX1 and TX1.
- garyvdg
- Posts: 91
- Joined: Thu Jul 25, 2013 12:37 pm
Re: GPS Shield & Due
I tried this latest version of the Adafruit_GPS library for Arduino Due support and wired the Ultimate GPS shield to the Due as suggested and it worked just fine. Thanks to Adafruit_Support_Rick for your effort and input.
Please be positive and constructive with your questions and comments.