2.8 tft arduino shield v2

Adafruit Ethernet, Motor, Proto, Wave, Datalogger, GPS Shields - etc!

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
thinwing
 
Posts: 32
Joined: Thu Feb 02, 2012 1:03 am

2.8 tft arduino shield v2

Post by thinwing »

hello I am using the 2.8 tft with a mega,but due to size constraints with my project housing ,need to seperate tft from mega and wire remotely.So besides the 6 pin icsp header,what pins do i need to connect for power and data..thanks kpc

thinwing
 
Posts: 32
Joined: Thu Feb 02, 2012 1:03 am

Re: 2.8 tft arduino shield v2

Post by thinwing »

Hello adafruit.....just a little help please,I cant enlarge the schematic on the datasheet enough to read the pinout

User avatar
adafruit_support_mike
 
Posts: 67446
Joined: Thu Feb 11, 2010 2:51 pm

Re: 2.8 tft arduino shield v2

Post by adafruit_support_mike »

Here's a larger version of the schematic: http://learn.adafruit.com/system/assets ... 1388769644

You need the SPI pins from the ICSP header (MOSI, MISO, and SCK), plus pins 9 and 10 for the TFT itself. The touchscreen uses pin 8, the SD card uses pin 4, and pin 3 is an optional control for the backlight.

Locked
Please be positive and constructive with your questions and comments.

Return to “Arduino Shields from Adafruit”