Hello,
We are planning on incorporating an Arduino circuit into an LED driver supply and would like to attach the Bluefruit shield we have purchased to it. We won't be putting header blocks onto the board and as such won't be able to use the shield as it was originally designed, but will instead have to run a ribbon cable from the required pins to connections on the Bluefruit shield. I have found the pinout for the Bluefruit that is not on a shield, but can you provide a pinout for the shield version so I can verify which pins need to be connected for the Bluefruit to work?
Pinout for Bluefruit shield
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- Franklin97355
- Posts: 23910
- Joined: Mon Apr 21, 2008 2:33 pm
Re: Pinout for Bluefruit shield
The Eagle files are here https://github.com/adafruit/Adafruit-Bl ... assic-PCBs
Please be positive and constructive with your questions and comments.