Use 2.8" TFT Touch Shield for Arduino on STM32Nucleo
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- dackley1935
- Posts: 3
- Joined: Sat Aug 30, 2014 8:57 pm
Use 2.8" TFT Touch Shield for Arduino on STM32Nucleo
Can I use your 2.8" TFT Touch Shield for Arduino as a shield on a STM32Nucleo board? The STM32Nucleo boards have a set of connectors that matches the Arduino Uno pinout, including the 3.3V and 5V power, without the ISP connector. The only difference is that the Arduino Uno board has 5V I/O while the STM32Nucleo boards have 3.3V digital I/Os with 5 V tolerant capability and analog inputs that can only handle 3.6V.
- adafruit_support_rick
- Posts: 35092
- Joined: Tue Mar 15, 2011 11:42 am
Re: Use 2.8" TFT Touch Shield for Arduino on STM32Nucleo
I'm not familiar with the STM32Nucleo, so I can't say for sure. However, it looks like it ought to work.
- dackley1935
- Posts: 3
- Joined: Sat Aug 30, 2014 8:57 pm
Re: Use 2.8" TFT Touch Shield for Arduino on STM32Nucleo
Thanks for the quick reply. Sounds like it should work. So, I've ordered one of your 2.8" TFT Touch Shield for Arduino to test on a STM32Nucleo. Once I get it and have had a chance to test it out, I'll let you know whether it works or not.
- adafruit_support_rick
- Posts: 35092
- Joined: Tue Mar 15, 2011 11:42 am
Please be positive and constructive with your questions and comments.