Are 4.95 V sufficient?

Moderator: adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
mschmidt
 
Posts: 17
Joined: Fri Jan 16, 2009 11:09 am

Are 4.95 V sufficient?

Post by mschmidt »

I am more or less an electronics newbie and the Fuzebox is one of my first soldering experiments. Everything works fine so far and I've soldered all the parts needed for the first test, that is checking if there are steady 5 V on the board. My multimeter shows a steady 4.95 V. Is that sufficient? (Perhaps I should add that I am living in Germany).

Cheers,

Maik

adafruit
 
Posts: 12151
Joined: Thu Apr 06, 2006 4:21 pm

Re: Are 4.95 V sufficient?

Post by adafruit »

4.95 is just fine, the 5v regulator will be off by about 1-2% without problems
if its like 4.5 or 5.5 thats not good!

Locked
Please be positive and constructive with your questions and comments.

Return to “Fuzebox (discontinued)”