I am more or less an electronics newbie and the Fuzebox is one of my first soldering experiments. Everything works fine so far and I've soldered all the parts needed for the first test, that is checking if there are steady 5 V on the board. My multimeter shows a steady 4.95 V. Is that sufficient? (Perhaps I should add that I am living in Germany).
Cheers,
Maik
Are 4.95 V sufficient?
Moderator: adafruit
Please be positive and constructive with your questions and comments.
-
- Posts: 12151
- Joined: Thu Apr 06, 2006 4:21 pm
Re: Are 4.95 V sufficient?
4.95 is just fine, the 5v regulator will be off by about 1-2% without problems
if its like 4.5 or 5.5 thats not good!
if its like 4.5 or 5.5 thats not good!
Please be positive and constructive with your questions and comments.