Hi guys,
i finished the xbee adaptors whit the EXAS INSTRUMENTS SN74AHC125D SMD SOIC14, it works fine, the microcontroler send me what ever i want to the pc over the xbee's.
the problem now i have is that i's using an Atmega8 at the 8Mhz inbound clock, and i don't know what boot loader to use so that i can use the xbee's.
PS. do i need to push the reset buton on the arduino everytime i write a new .hex to the atmega8 with the promesing bootloader?
Xbee comunication done need atmega8 bootloader
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- catalin.ene33
- Posts: 8
- Joined: Tue Apr 14, 2009 7:50 am
- catalin.ene33
- Posts: 8
- Joined: Tue Apr 14, 2009 7:50 am
Re: Xbee comunication done need atmega8 bootloader
can you plz help me!!!
-
- Posts: 12151
- Joined: Thu Apr 06, 2006 4:21 pm
Re: Xbee comunication done need atmega8 bootloader
this forum is for people who have purchased kits from adafruit
if you didnt buy a kit, you're on your own, sorry!
if you didnt buy a kit, you're on your own, sorry!
-
- Posts: 3
- Joined: Thu Dec 28, 2006 9:37 pm
Re: Xbee comunication done need atmega8 bootloader
what kind of bootloader are you wanting/needing? I hacked the megaload bootloader to first reset and get the xbee up and running and then used it on my project... Google for megaload.
- catalin.ene33
- Posts: 8
- Joined: Tue Apr 14, 2009 7:50 am
Re: Xbee comunication done need atmega8 bootloader
thx shadowmite i will studi about it
Please be positive and constructive with your questions and comments.