Xbee comunication done need atmega8 bootloader

XBee projects like the adapter, xBee tutorials, tweetawatt/wattcher, etc. from Adafruit

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
catalin.ene33
 
Posts: 8
Joined: Tue Apr 14, 2009 7:50 am

Xbee comunication done need atmega8 bootloader

Post by catalin.ene33 »

Hi guys,

i finished the xbee adaptors whit the EXAS INSTRUMENTS SN74AHC125D SMD SOIC14, it works fine, the microcontroler send me what ever i want to the pc over the xbee's.
the problem now i have is that i's using an Atmega8 at the 8Mhz inbound clock, and i don't know what boot loader to use so that i can use the xbee's.


PS. do i need to push the reset buton on the arduino everytime i write a new .hex to the atmega8 with the promesing bootloader?

User avatar
catalin.ene33
 
Posts: 8
Joined: Tue Apr 14, 2009 7:50 am

Re: Xbee comunication done need atmega8 bootloader

Post by catalin.ene33 »

can you plz help me!!!

adafruit
 
Posts: 12151
Joined: Thu Apr 06, 2006 4:21 pm

Re: Xbee comunication done need atmega8 bootloader

Post by adafruit »

this forum is for people who have purchased kits from adafruit
if you didnt buy a kit, you're on your own, sorry!

shadowmite
 
Posts: 3
Joined: Thu Dec 28, 2006 9:37 pm

Re: Xbee comunication done need atmega8 bootloader

Post by shadowmite »

what kind of bootloader are you wanting/needing? I hacked the megaload bootloader to first reset and get the xbee up and running and then used it on my project... Google for megaload.

User avatar
catalin.ene33
 
Posts: 8
Joined: Tue Apr 14, 2009 7:50 am

Re: Xbee comunication done need atmega8 bootloader

Post by catalin.ene33 »

thx shadowmite i will studi about it

Locked
Please be positive and constructive with your questions and comments.

Return to “XBee products (discontinued)”