Tweet-a-watt Reciever Problem
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
-
- Posts: 124
- Joined: Tue Jul 22, 2008 12:36 pm
Tweet-a-watt Reciever Problem
I have a tweet-a-watt kit that's using the standard issue reciever rig that's specified in the guide, and when I put an xbee radio in the reciever, the green light starts flashing on and off. It's a steady on/off blinking pattern. I am unable to reset the Xbee radios or re-flash them with this setup, and I have two reciever units and three modems, including the one from digi that has the external connector on it. All three radios and both socket/usb adapters exhibit the same issue. Has anyone seen this before?
-
- Posts: 12151
- Joined: Thu Apr 06, 2006 4:21 pm
Re: Tweet-a-watt Reciever Problem
are you selecting the right COM port? did you by chance set RTS on Close?
-
- Posts: 124
- Joined: Tue Jul 22, 2008 12:36 pm
Re: Tweet-a-watt Reciever Problem
I am selecting the right come port, but I am not sure what you mean by RTS on close.
-
- Posts: 12151
- Joined: Thu Apr 06, 2006 4:21 pm
Re: Tweet-a-watt Reciever Problem
ok hmm. can you not talk to the xbee at all or can you talk but not upgrade?
Please be positive and constructive with your questions and comments.