Problem communication

XBee projects like the adapter, xBee tutorials, tweetawatt/wattcher, etc. from Adafruit

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
Synodiporos
 
Posts: 1
Joined: Thu May 03, 2012 8:57 am

Problem communication

Post by Synodiporos »

Hello everyone!

I have two XBEE (series 2) devices and I want connect the first device with a microcontroller (arduino) and the other one on my computer. So I want to control the arduino board from my computer wirelessly. The first device is configured as a coordinator AT (1047) and the second as a Router / End Device AT (1247). These two devices must exchange data in real time (fast).
The problem is that the second Xbee (Router / End Device) cannot read fast the data sent by the computer. This device reads olny 5-6 commands and after that crashes. Must to wait 6-7 seconds to start read again. Instead, the first device(Coordinator) reads and sends all the data in real time.

Does anyone know what could be wrong? I've done something wrong in the regulation of devices?

Thanks!

User avatar
adafruit_support_bill
 
Posts: 88086
Joined: Sat Feb 07, 2009 10:11 am

Re: Problem communication

Post by adafruit_support_bill »

Hi, We don't sell or support the Series 2 XBees. You should contact the vendor or try the Digi forums for support.

Locked
Please be positive and constructive with your questions and comments.

Return to “XBee products (discontinued)”