XBee Arduino programmer issues on Arduino Uno REV3

XBee projects like the adapter, xBee tutorials, tweetawatt/wattcher, etc. from Adafruit

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
joshlucy
 
Posts: 4
Joined: Tue May 29, 2012 2:11 pm

XBee Arduino programmer issues on Arduino Uno REV3

Post by joshlucy »

Hello all, I followed the instructions at http://www.ladyada.net/make/xbee/arduino.html to build a wireless XBee programmer and I've been having a great deal of difficulty making the programmer work. I'm able to do serial debugging, and the reset function works but I've been getting error messages when trying to program the unit:

avrdude: stk500_getsync(): not in sync: resp=0x1e

I've tried using the following baud rates: 56700 (current), 19200, and 115200 [by default the software is programming at this speed over USB so I figured I'd give it a try]. I only seem to get debugging data sent by Serial.println() and related. Does anyone know if there's something different that needs to be done on the Uno R3 to make wireless programming work?

User avatar
adafruit_support_bill
 
Posts: 88087
Joined: Sat Feb 07, 2009 10:11 am

Re: XBee Arduino programmer issues on Arduino Uno REV3

Post by adafruit_support_bill »

I'm able to do serial debugging, and the reset function works
So you see the board reset when you start the upload? There should be a few quick flashed from the LED.

Locked
Please be positive and constructive with your questions and comments.

Return to “XBee products (discontinued)”