The new Raspberry Pi B Model B+ is here - Pick one up in the store and check our detailed guide!

XBee's DIO for SPI or i2c?

by presence on Sat Aug 11, 2012 10:41 pm

Could it be possible to jam i2c through an XBee's digital IO pins?

Say, like, an Arduino's Analog 4&5 pins for i2c's CLK and DAT are punted into two of the XBee's DIO pins. Then, the remote XBee's DIO pins can be plopped into the back of the Adafruit Mini 8x8 LED I2C Backpack along with a battery. I'd imagine on the Arduino side, the XBee would require Adafruit's XBee Adapter kit to step the voltage down.

Can the XBee's DIO pins be twaggled quickly enough to pass i2c wirelessly? Imagining an itty bitty stand-alone battery-powered wireless LED matrix display controlled from a remote Arduino/computer, using XBee's DIO pins as the glue.
User avatar
presence
 
Posts: 11
Joined: Wed Apr 29, 2009 7:37 pm
Location: Las Vegas, NV

Re: XBee's DIO for SPI or i2c?

by adafruit on Tue Aug 21, 2012 8:11 pm

you could do VERY SLOW spi, i2c is right out!
User avatar
adafruit
 
Posts: 11634
Joined: Thu Apr 06, 2006 3:21 pm
Location: nyc